PodMont will adhere very well to any case that is hard, flat without ridges and made of TPU and/or polycarbonate. It will not stick to silicone phone cases.

PodMont will provide a snug and secure hold for all AirPods currently in the market (Generation 1, 2, 3, Pro 1, 2, 3 and AirPods 4). Note: if you're using PodMont with a long-stemmed version of AirPods you should only push the stem down into the PodMont quivers to the point of creating a secure hold. We advise that you not screw the entire stem length through the quivers, as that makes it more difficult to remove the AirPods and may cause one to forcefully remove the PodMont from its adhesion.

PodMont is optimized to fit on and stick well to most iPhone models. It will not stick well to iPhones with titanium surfaces (e.g. iPhone 15/16 Pro or Pro Max; see below for more info regarding 15/16 Pro models).

Yes, PodMont will work well on cases for iPhone Pro Max models made of TPU/PC that are hard and flat without ridges (not silicone).

Due to the additional width of the camera module on iPhone Pro 15/16, even if placed as close as possible to the end of the camera module the end of the PodMont typically ends just after the top of your iPhone begins to slope, potentially causing the PodMont to not maintain its adhesiveness. Therefore, PodMont is not suggested for use at the top of your 15/16 Pro even on a phone case. You could attach PodMont to another area of your phone such as one of the long side edges.

The camera module is narrower on these models and the iPhone itself is not made of titanium, so PodMont should work well either directly on a phone or on a case as discussed above.

The camera module plateau prevents PodMont from flattening against the phone as it does on all earlier iPhone models. Even so, we have successfully tested the adhesiveness of the PodMont both directly on iPhone 17 Pro Max and on cases placed on the iPhone 17 Max. However, the tops of the AirPods will not sit as neatly on top of the iPhone as it does with all other earlier models.

Yes – there is not enough empty space for a PodMont to be placed on the camera module of a 17 Pro, however, you could stick a PodMont to one of the long side walls.

Not at all. PodMont uses a specially designed adhesive that sticks securely, but removes cleanly without leaving any residue.

Not a chance. PodMont's 'stiction' grip holds your AirPods tightly and securely. They stay put until you intentionally remove them.

No. In our testing removing the PodMont degrades the adhesive causing it to no longer provide an optimal stick on a second surface. As we roll out additional products we plan on making replacement adhesives available for PodMont reuse.

Absolutely. PodMont features rounded edge corners, diagonalized quivers and a slim profile to ensure snag-free use in and out of your pockets. You'll barely notice it's there, until you need your AirPods.

Yes – PodMont is protected by multiple US and EU patents. The PodMont name as a trademark is currently pending with the USPTO.

If we are notified at info@podmont.com within 14 days you may arrange and pay for return shipping. All returns are self-service returns, and subject to our Return and Exchange policy. If you received free shipping, any return you make is self-service and you must arrange to pay for a carrier for return shipping. We can not accept order cancellations once your order has shipped.

Yes! And, we are interested in the color(s) that you want – so feel free to drop us a line to info@podmont.com with any color requests or product feedback that you would like to share with us.